Atlas copco spares

Atlas copco spares in chennai

Hoses

Hose is an flexible hollow tube designed to carry fluids from one location to another. Hoses are also sometimes called pipes (the word pipe usually refers to a rigid tube, whereas a hose is usually a flexible one), or more generally tubing. The shape of a hose is usually cylindrical (having a circular cross section). Hose design is based on a combination of application and performance. Common factors are size, pressure rating, weight, length, straight hose or coilhose, and chemical compatibility. To achieve a better pressure resistance, hoses can be reinforced with fibers or a steel cord. Commonly used reinforcement methods are braiding, spiraling, knitting and wrapping of fabric plies. The reinforcement increases the pressure resistance but also the stiffness.

Cooler

An cooler is a mechanical heat exchanger designed to remove the heat-of-compression from a compressed air system and to condition the air so it can be used in air- operated equipment. Regardless of the type of compressor being used, the compressed air discharged from that air compressor is going to be hot. That temperature will vary according to the type of compressor being used. The screw compressor cooler is designed and manufactured by professionals using finest quality raw material and latest technology. Moreover, we test that entire range on different parameters to make a flawless dispatch from our end.

Elecktronikon Board (PLC/HMI)

An Elecktronikon Board (PLC/HMI) is a special computer device used in industrial control systems. Due to its robust construction, exceptional functional features like sequential control, counters and timers, ease of programming, reliable controlling capabilities and ease of hardware usage – this PLC is used as more than a special-purpose digital computer in industries as well as in other control-system areas. All our products will meet or exceed the original OEM quality, specifications, and performance at best prices in ramraj enterprises.

Sensor

A sensor is a device module or subsystem whose purpose is to detect events and changes in its environment and send the information to other electronics. Frequently a computer processor. A sensor is always used with other electronics. With this electromechanical device that converts a mechanical change such as displacement into an electrical signal that can be monitored.

Service kits

Service kits are available for a large range of equipment and separators. All parts are specifically designed to match equipment and operating conditions the perfect fit and compatibility of the equipment. They have higher wear resistant and hence have loner service life and efficiency. As a result, customer need accurate requirement for the maintained to be completed.

Air oil seperator

A Air oil separator is used to separate the compressor lubricant from compressed air stream. Savage line is to remove oil from the slump. Once it is removed it is again sent to the reservoir for recompression in a continuous cycle. The separators are widely appreciated for their superior performance and long service life. These are available to our customers at various industries leading prices making them preferred choice of our esteemed selection.

Oil filter

An oil filter is a filter designed to remove contaminants from engine oil, transmission oil, or hydraulic oil. Oil filter are situated in their own perspective’s states. It is made by steel with high resistance to wear and corrosion. The tap threads meet all according to the specificatons.it is restricted by very effective adhesion that is very resilience to heat, pressure and impulses. The filter also must be able to remove particles fast enough to keep with new rates particles arrive into the oil.

Couplings

couplings are mechanical devices used to transmit power / torque from one shaft to another shaft. Powers can be transmitted by means of various gear arrangements or drivers only if the shafts are parallel. Couplings are used when shafts are in a straight line and are to be connected to end to end to transmit power. It consists of following features:

  • To transmit power from driver shaft to drive shaft.
  • To introduce an extra flexibility while transmitting power in case of space restrictions.
  • To introduce protection against overloads
  • To reduce the transmission of shock loads from one shaft to another by using flexible couplings.

Compressor oil

An Compressor oil compressor oil is designed to provide long service life in most compressor applications. The thermal stability and oxidation resistance of these fluids can help to maintain cleaner compressors, thereby enabling longer running periods between scheduled maintenance and oil changes. The outstanding anti wear and corrosion protection are designed to enhance the equipment life, while reducing maintenance requirements.

Dryers

Dryers are mass transfer process consisting of the removal of water or any other solvent by evaporation from solid, semi solid, or liquid. This process is often used as a final production step before selling or packaging of products. Simple test can reveal considerable semiquantative information about a material drying behaviour under proposed drying conditions leading to elimination of dryer. Timber of high-quality end use can be reduced by seasoning vaccum rather than by schedule at atmospheric pressure.